Classic Series

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength.  Panels are 6 rail, 5' tall and mount on Classic Series connecting post making a 6' tall panel. Available in 2', 3', 4', 6', 6'6", 8', 10', 12', 14', and 16' lengths. Available in powder-coat finish or a pre-galvanized tubing.

 Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength.  Panels are 6 rail, 5' tall and mount on Classic Series connecting post making a 6' tall panel. Available in 4', 6' 6", 8', and 10' lengths as stock. Mainly used for alleys and bud boxes. Other sizes available upon request. Available in powder-coat finish or a pre-galvanized tubing.

 Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength.  Panels are 6 rail, 5' tall and mount on Classic Series connecting post making a 6' tall panel. Available in 4', 6' 6", 8', and 10' lengths as stock. Mainly used for alleys and bud boxes. Other sizes available upon request. Available in powder-coat finish or a pre-galvanized tubing.

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength.  Gates are 6 rail, 5' tall and mount on Classic Series connecting post making a 6' tall gate. Choose from either a 7' 8" (low pole) frame, or a 9' 6" (high pole) frame. Available in 8', 10', and 12' lengths. Available with half-sheet or full-sheet upon request. Spring loaded plunger latch is standard. Optional horseback latch is offered. Available in powder-coat finish or a pre-galvanized tubing.

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength.  Panels are 6 rail, 5' tall and mount on Classic Series connecting post making a 6' tall panel. Available in 8', 10', and 12' lengths. Walk through gate portion in 4' wide with a 7' tall frame and a spring loaded plunger latch. Optional half-sheeted and full-sheeted is offered. Available in powder-coat finish or a pre-galvanized tubing.

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength.  Panels are 6 rail, 5' tall and mount on Classic Series connecting post making a 6' tall panel. Available in 2', 3', 4', 5', 6', and 7' widths. These are measurements of the actual gate. Each will fill 12" more than stated measurement, i.e. a 3' gate will fill a 4' spot, and 7' gate will fill an 8' spot. Frames are 7' tall. Optional half-sheeted and full-sheeted is offered. Available in powder-coat finish or a pre-galvanized tubing.

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength.  These gates are 6 rail, 5' tall and when mounted 1' off the ground, will make a 6' tall gate. Available in 8', 10', 12', 14', and 16' lengths. Actual gate size is 4" shorter than length designation. Hinge side of gate includes 2 - 18" flat strap that can be either welded to hanging post, or lag screwed/bolted to hanging post. Latch side of gate includes a spring loaded plunger latch and weld on strike plate. Bolt-on strike plate is an available option.

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength.  The alley control is offered in a 32" wide by 7' tall frame, a 32" wide by 7' tall gate, and 38.5" wide by 7' tall frame. Each side of the frame features 3-way pins.

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength. Rolling block doors are available in 32" widths and 38.5" widths. Both are available in a powder-coat finish or pre-galvanized tubing. 

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength. These post are made from 2-3/8" pipe and stand 6' tall. Available with 1-way, 2-way 90 degrees, 2-way 180 degrees, 3-way, and a 4-way connecting pins. Choose from powder-coat finish or pre-galvanized pipe.

Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry.  These are the Gates and Panels which prestigious organizations such as the CBR depend on year after year.  All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 PSI yield strength. These posts are made from 2-3/8" pipe. Posts are either 7'8" tall or 9'6" tall. Available with 1-way, 2-way 90 degrees, 2-way 180 degrees, and 3-way connecting pins. Bars come in lengths of 8', 10', and 12'. Choose from powder-coat finish or pre-galvanized pipe and tubing.